TTGO T5 4.7 inch E-paper ESP32 V3 16MB FLASH 8MB PSRAM WiFi Bluetooth for Arduino, PH2.0 Holder Version

Product Description

T5 4.7-inch E-Paper 1. The T5 series of ink screen versions include 1.02, 1.54, 2.13, etc., from small to large electronic ink screen versions. 2. We have been committed to low-power design optimization. This 4.7-inch version continues the low-power design, the sleep mode current is about 170uA, and two optional battery modes are designed on the back. 3. One is PH 2.0 pitch 2pin interface, and the other is 18650 battery metal connector. Two power supply modes for you to choose. 4. A 6pin touch screen interface is reserved as an optional accessory to facilitate your application. 5. There are 5 buttons reserved on the side, 4 of which are custom buttons, which can define functions flexibly. One is the reset button. Motherboard Parameter motherboard parameters: 1. ESP32-WROVER-E (ESP32-D0WDQ6 V3) 2. 16MB FLASH 3. PSRAM 8MB 4. USB to TTL CP2104 5. 4.7 inches, 540(H)X960(V) resolution, 16 Gray Level ED047C1, and supports partial refresh 6. 960X540 resolution 8-bit parallel port 4.7 inch ink screen 7. 4pin 2.0 molex 4 p 53015-0410 X3 8. RST button X1 9. Custom button X4 10. TYPE-C 11. Battery holder PH 2.0 pitch 12.18650 battery metal connector 13. 6pin FPC touch screen expansion connector 14. Battery charge and discharge protection chip 15. USB input power 5V at 1A 16. 4pin expansion interface output is 3.3V 17. Sleep mode current at ~170uA Develop software 1. Arduino 2. IDF 3. Micropython Application scenario 1. Desktop weather station 2. STEM Education 3. IOT device 4. Pin diagram

Specifications

SKU

DIY6213

Category

Consumer Electronics › Arduino & SCM Supplies › Other Accessories

Weight

0.124 kg

Delivery

Standard delivery